Carlube DOT 3 Brake Fluid 500 ml

Product Information

Yes, DOT 3 brake fluid is still the most common type used in cars and trucks today; however, DOT 4 is gaining popularity due to its lower viscosity. It contains inhibitors to prevent the corrosion of metallic brake components and to reduce oxidation at increased temperatures.

For transportation purposes, DOT 3 brake fluid is classed as only moderately flammable with a flammability rating of 1. DOT 3 brake fluid will absorb less water than DOT 4 from the air over time, meaning you’ll need to have your fluid changed less frequently. Remember that brake fluid is a toxic substance and should be handled with care; always dispose of used brake fluid according to local regulations. All applications are assessed individually by Klarna and decisions are based on individual circumstances.Very good thermal resistance and stability : The typical dry boiling point (245°C / 473°F), superior to DOT 3 conventional fluids (205°C / 401°F mini) and DOT 4 (230°C / 466°F) enables an effective brake even under extreme conditions.

Security: The typical wet boiling point (160°C / 320°F), superior to DOT 3 conventional fluids (140°C / 284°F mini) and DOT 4 ( 155°C / 311°F) enables to use the product longer. Lucas DOT 4 Brake Fluid is a high quality blend of polyethylene glycol ethers and additives which meet or exceed the industry minimum dry boiling point of 446'F. However, water has a much lower boiling point and can boil from the temperatures produced during braking. On the long test runs (over 15 laps), we swaw 165 degree rear gear temperatures and 185 degree transmission temperatures.

Whenever drivers use their brakes, the brake fluid heats up and as brake hoses get older the amount of moisture that gets into the system increases, which means the brake fluid boiling point is lowered. Liqui Moly brake fluids are specially formulated to offer superior heat resistance and compatibility with a variety of vehicles and braking systems. While it is possible to mix the two, it is not advised due to differences in boiling points and performance characteristics. DOT 3 brake fluid is a polyethylene glycol-based fluid that uses glycol ether as a solvent and is suitable for all brake systems. The main difference between DOT 3 and DOT 4 brake fluids is their boiling points, with DOT 4 having a higher boiling point than DOT 3.

g. some BMW M3 vehicles), please check the specification and select the correct Brake Disc(s) and Quantity. This product is slightly soluble in water however this does degrade the quality of the fluid if water mixes with the product. Credit subject to status, UK residents only, Euro Car Parts Limited acts as a broker and offers finance from PayPal Credit. In this part, we present a comprehensive guide on changing brake fluid, encompassing the required tools and safety measures to be taken. span class="fs-small">Once the colleague has started to put the transaction through, you will be asked to finish the application on a mobile device (e.In summary, the main difference between the two formulas is their ability to handle heat and water absorption within the braking system.

That said, you should always use brake fluid that is the same rating that your vehicle’s manufacturer recommends in the owner’s manual. You can change your choices at any time by visiting Cookie preferences, as described in the Cookie notice. The manufacturer’s recommendations will provide you with accurate information on the appropriate brake fluid for your specific vehicle and ensure that you’re using a fluid that is compatible with your vehicle’s braking system. Recommended for all types of hydraulic actuated brake and clutch systems with DOT 4 and DOT 3 manufacturer recommendations. When you need your brake fluid changed, you should consult your owner’s manual to see what type of brake fluid your car recommends.By doing this, you will prevent water contamination and debris from shortening the life of the whole braking system. li class="ml-20">* Excludes some Online Exclusive lines - Items sent directly from the supplier (some Online Exclusive lines and Car Parts) can take up to 10 working days. Each vehicle will have a specific requirement for brake fluid formula, so it is important to establish this when performing an initial inspection on the vehicle’s braking system. The 103 third parties who use cookies on this service do so for their purposes of displaying and measuring personalized ads, generating audience insights, and developing and improving products. It has a higher boiling point than DOT 3 brake fluid, with wet and dry boiling points at 445°F/230°C and 310°F/155°C, respectively.